The Vandy Vape Kylin M AIO Pod System is a True Rebuildable Pod Kit.

It is made & designed for Pre-Built Coils as well as DIY.

This Device uses 1 x 18650 Battery that is not included.

Wattage Range is 5W to 70W. There is a Screen underneath the Panel that shows the Wattage, Ohms, Voltage, & Battery Meter.

Under that are 2 Up/Down Buttons & below that is a Type-C Port.

While it is generally not recommended to charge a 18650 Battery through a Port, the option is there to use.

The Pod Capacity is 5mL if you are using the Rebuildable Pod and 2.5mL if you are using Pre-Built Coils.

If you choose to use the Rebuildable Pod you have the option of using a – A1 M Coil 0.2 Ohms, Dual M Coil 0.15 Ohms, SS316L M Coil (TC) 0.15 Ohms, Ni80 M Coil 0.15 Ohms, or a Triple Fused Clapton Coil 0.23 Ohms.

The Pre-Built Coil is a M Coil that is 0.3 Ohms with the recommended/best use being 35W – 45W. It is a Single Meshed Coil.

Parameters:

• Size: 100mm (L) x 46.5mm (W) x 24.5 (D)
• True Rebuildable AIO Pod Designed For Pre-Built Coils & DIY
• Output Power: 5W – 70W
• Battery: 1 x 18650 (not included)
• Capacity: 5mL Rebuildable, 2.5mL Pre-Built Coils
• Coil: M Coil .3 Ohms (35W – 45W) Single Meshed
• PCBA Waterproof Out Of Box

It Comes With:

• 1 x Kylin M AIO Device
• 1 x Kylin M AIO DIY Pod (5mL)
• 1 x Kylin M AIO Pod (2.5mL
• 1 x Kylin M AIO Coil (0.3 Ohms)
• 1 x Kylin M AIO Coil (A1 M – 0.2 Ohms)
• 1 x Kylin M AIO Coil (SS316L M – 0.15 Ohms TC)
• 1 x Kylin M AIO Coil (Dual M – 0.15 Ohms)
• 1 x Kylin M AIO Coil (Ni80 M – 0.15 Ohms)
• 1 x Triple Fused Clapton Coil (0.23 Ohms)
• 1 x M Wire Rod
• 1 x Lead Guide
• 2 x Cotton Laces
• 5 x Steel Wires
• 1 x Wire Heating Tool
• 1 x Accessory Bag
• 1 x Usage Guide
• 1 x Instruction Manual
• 1 x Type-C USB Cable

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Enter the code in the box below: